How to improve the breeding rate of poultry farming equipment

Poultry farming equipment uses ordinary light bulbs for lighting, and the development trend is to use energy-saving lamps. Many chicken farms install automatically timed switches, rather than manual switches, to ensure accurate and reliable lighting times. How can its breeding rate be improved?
1. In order to complete each batch in the poultry farming equipment, it is necessary to take a snapshot of the inspection line and tighten the screws as soon as possible to upgrade the system again.
2. The feeding hopper will generate a lot of dust, and sometimes the feeding mechanism cannot be started. This is because the photoelectric switch controls the feeding to stop, and the body is covered with dust, which makes the unloading unable to start.
3. The power of the driving method of poultry farming equipment has begun. The screw motor is a high-speed motor, so power failure will always lead to belt aging and motor accidents.
4. Check whether the chain and sprocket chain are correct, and whether the transmission chain is loose and rusted.
5. After each batch of processing, stick it on the motor shaft and add butter to the chicken feed line for maintenance. A few drops of vegetable oil can be added to the motor to avoid rusting.
6. The chicken raising equipment must not have the problem of track obstacles, otherwise there will be deviations.

7. The feeder cooperates with each part to raise chickens under the control of the hard tooth surface gear chain. The poultry farming equipment advocates that the gears and chains with hard tooth surfaces need to be lubricated to partially avoid damage due to lack of lubrication.