How to clean the drinking fountain of poultry farming equipment

Water is an important mineral for maintaining the normal activities of chickens. If the chicken is short of water, there will be a series of disadvantages. When the poultry farming equipment is in normal operation, in order to avoid these bad phenomena, scientific methods should be used to add water to the chickens. Cleaning the drinking fountain of poultry farming equipment is also one of the things we have to do. Today, we will introduce its cleaning method to you.
Many people find that it is very troublesome to clean the drinking fountain for chickens, so it is usually installed and used for a long time without cleaning, resulting in the blockage of the drinking fountain and abnormal use. This is incorrect behavior.
In the drinking fountain of poultry farming equipment, the discharged water remains in the water pipe, and several drinking nozzles are opened in the sewer pipe section. The water is left in the drain to prevent it from spoiling and contaminating the drinking water system. For potable water or water, flush pipes and tanks should be used to prevent accumulation in potable water systems, causing sedimentation, spoilage and water contamination.
In production practice, if foreign objects are found in the drinking fountain of chicken farming equipment, the other end of the high-pressure water pipe can be opened with a pressure water pipe with fast water flow. and sediment to clean high-pressure water pipes. If there is biofilm on the short joint of the water pipe, hydrogen peroxide can be used to remove the biofilm.
This method is often used to flush chicken equipment pipes, which can prevent the formation of viscous and deteriorated foreign matter and the deposition of foreign matter in the water, thereby ensuring the cleanliness of drinking water.
When the poultry farming equipment is cleaned, we also need to clean up all the remaining feed on the feeding line, especially the feed left in the trough, the corner of the conveyor chain and the hopper. When cleaning, use vacuum cleaners, roller fans, iron brushes, etc. Also, under the feed chain, insert the sawdust with an abrasive tool to let the chain run and remove the fixed feed residue.